Below is a list of FAQs to help address any questions you may have with the program.
FAQs
Registration & Program Details
Our program is designed to provide you with the equipment necessary to monitor your jobsite remotely, including different types of sensors and a communications gateway. You will also have access to download the mobile app, Meshify Protect™, which allows you to manage your account from your smartphone.
Sensor Solutions by HSB™ has several features not usually found in off-the-shelf systems:
- It uses the cellular network, not Wi-Fi so it's more secure and doesn’t require use of your internet service.
- If power goes out, the sensors will run on battery power and continue to transmit information. Systems that rely on Wi-Fi will not continue to transmit information if power is interrupted.
- The system comes with monitored support 24/7/365 with alerts being sent via text and email. If severe, a phone call is triggered. Many off-the-shelf systems rely on an audible alarm that may not be heard if no one is in the area.
Sensors act as a “virtual watchdog” when you’re not on-site and send an alert when there are signs of a pending problem so that you may address any issues. For example, if a sensor detects a dangerously low temperature or the presence of water, quick notification may allow you time to act and prevent damage or minimize its impact.
The sensor kits are predetermined and depend on the size and needs of your jobsite or renovation. Our team will enroll you in the sensor program that best aligns to your needs.
After you sign up, you will receive emails with your order confirmation and tracking information for the sensors.
The cost of the sensors and monitoring is dependent on which kit you choose. Details can be found on the home page at https://www.sensorsignup.com/hanover-builders/en/home.html
You will need to contact Sensor Support at (844) 468-1866 or email
sensorsupport@hsb.com to opt out of the program and stop the monthly monitoring fee.
Sensors & Activation
As part of this program, you may receive the following types of sensors: temperature/humidity and water. These sensors will monitor conditions such as low room temperatures, moisture in the air, or the presence of water, plus a gateway that communicates with the sensors and the Sensor Support Team.
In addition, you have the option to use various accessories, including temperature probes and water leak rope attachments.
The best and easiest way to get guidance on activation and placement is the free downloadable Meshify Protect™ app. There’s no need to hire an electrician or plumber. If at any point you have difficulty with activation, you can contact the Sensor Support Team.
The amount of time needed to activate depends on the number of sensors contained in your kit. The gateway should take about 5 minutes to activate. The sensors should take a couple of minutes each and can be placed once they are connected.
You will need to create your account and activate the equipment. Both steps are necessary to receive accurate alerts. Using the mobile app, Meshify Protect™, is the quickest way to get started.
The size of the sensors is 3.4" x 1.3".
The sensors are battery powered. The gateway’s primary power source is a standard power supply. In the event of a power failure, the gateway has a 4-hour backup. If there is an outage, you will receive an alert letting you know that the gateway is using backup. You will also receive an alert when power is restored to the gateway.
The batteries iare standard lithium AA batteries, which are available online or any hardware store. You can check the battery levels of your sensors through the mobile app.
Alerts
No. The monitoring service is automatic. If the sensors detect an alert condition, an alert is sent immediately.
The alert rules are pre-configured by HSB’s engineers, so you don’t need to worry about choosing what temperatures or conditions will trigger an alert. When you activate the sensors, add the sensor placement notes in the app and HSB can handle the rest.
When an alert is triggered at your jobsite, a notification, text or email is sent to the contacts you designate in the app. If conditions are severe (e.g., water is detected, or temperatures are dangerously low), and no one responds to the alert notification, an automated phone call will be made to the primary contact. If no contact is made, the Sensor Support Team will also call you.
The alerts are sent to everyone on your designated contact list. Phone calls, used for urgent alerts, are made when no one reponds to the app notification, SMS text or email. The automated phone call is first made to the primary contact. If the primary contact does not answer, messages will be left and the Sensor Support Team may also call you and your designated contacts.
You may receive alerts for a variety of reasons.
Warning alerts will be sent via SMS text and/or email. These alerts indicate there may be an issue that needs attention and may include:
- Low temperature: the sensors detect a drop in indoor temperature
- Mold risk: the conditions at your location are conducive to the formation of mold
Urgent alerts are more severe and will be sent via app notification, SMS text and email followed by an automated phone call to the primary contact if no one responds to the initial notification. These alerts require immediate attention.
- Low temperature: the sensors have detected a significant and sustained drop in indoor temperature
- Water: the presence of water has been detected
You may also receive informational alerts about the equipment:
- Gateway power outage: the gateway is now using battery power
- Gateway power return: gateway power has been restored
- Gateway offline: the gateway is not communicating
- Low battery: the sensor battery is running low
- Sensor offline: the sensor is not communicating
Yes. You should ensure that the equipment is still in working condition before moving to a new site. Contact Sensor Support at (844) 468-1866 or email
sensorsupport@hsb.com to update your account with the new address and ensure location name is accurate. You can buy additional sensors through the Sensor Store.
Mobile App
The Meshify Protect™ app allows you to activate your sensors and manage your account from your smartphone. The app is available to download for free.
On your smartphone, go to your app store and download the Meshify Protect™ app.
No, alerts are sent via text and email. You may receive a phone call depending on the severity of the alert.
24/7 Support
Once you have signed up for the program, you can reach out with technical questions or for guidance on activation to the Sensor Support Team at (844) 468-1866 or sensorsupport@hsb.com.
[crx3composite, nosamplecontent, publish, cloud-ready]
